Jump to a section

Chemistry - Polymers

Practise 45 TS EAMCET previous year questions on Polymers, compiled from papers spanning 2001 to 2025. Each question is pulled directly from the actual exam paper it appeared in, so you're practising in the exact style and difficulty TS EAMCET tests.

Polymers has been asked in 15 of the 24 years of TS EAMCET papers analysed (2001–2024), with 45 questions in all. 58% of them were easy, 33% moderate and 9% tough. Most of its questions came from 2020, with 8 questions that year. In the last three years (2022–2024) it had 12 questions across 17 papers, about 0.7 per paper.

The chapter's 2 topics are not weighted equally: Preparation and Properties of Polymers (25 questions, 56%) and Classification of Polymers (20 questions, 44%) have been asked the most. Preparation and Properties of Polymers has also led over the last five years, with 12 questions. Preparation and Properties of Polymers has produced the most tough questions (3).

  1. 1Polymer X is an example of polyester and Y is an example of polyamide. X and Y are respectively04 May, 2025 (M)Preparation and Properties of Polymers
  2. 2The polymer chains are held together by hydrogen bonding in a polymer X. Polymer X is formed from monomers Y and Z. What are Y and Z ?04 May, 2025 (E)Classification of Polymers
  3. 3Neoprene is the polymer of a monomer X. IUPAC name of X is03 May, 2025 (M)Preparation and Properties of Polymers
  4. 4Match the following List - 1 (Type of polymer) List -2 (Structure of the example) A Fibre I B Elastomer II C Thermosetting polymer III D The03 May, 2025 (E)Preparation and Properties of Polymers
  5. 5' X ' is a polymer, which is mainly used for making unbreakable cups and laminated sheets. The monomers of ' X ' are02 May, 2025 (M)Preparation and Properties of Polymers
  6. 6Ethylene on reaction with cold, dilute alkaline at 273 K gives a compound ' P '. This on polymerisation with which of the following gives da02 May, 2025 (E)Preparation and Properties of Polymers
  7. 7Which one of the following is not an example of condensation polymer?11 May, 2024 (M)Classification of Polymers
  8. 8Identify the structure of the polymer ' formed in the given reaction10 May, 2024 (M)Preparation and Properties of Polymers
  9. 9What are ' X ' and ' ' respectively in the following reactions10 May, 2024 (E)Preparation and Properties of Polymers
  10. 10Match the following The correct answer is09 May, 2024 (M)Preparation and Properties of Polymers
  11. 11The monomer which is present in both Bakelite and Melamine polymers is09 May, 2024 (E)Classification of Polymers
  12. 12Ziegler-Natta Catalyst is used in the manufacture of14 May, 2023 (M)Preparation and Properties of Polymers
  13. 13is one of the monomers for the formation of a polymer called14 May, 2023 (M)Preparation and Properties of Polymers
  14. 14The correct answer is14 May, 2023 (E)Classification of Polymers
  15. 15From the following, the correct statements about polysaccharides are (I) Starch is a polymer of -glucose (II) Amylose component of starch is14 May, 2023 (E)Classification of Polymers
  16. 16Identify the correct statement from the following (A) Glyptal is made from the monomers ethylene glycol and phthalic acid (B) Bakelite is us13 May, 2023 (E)Preparation and Properties of Polymers
  17. 17Amongst the following, how many of them come under the category of elastomers? Natural rubber, polyethene, vulcanized rubber, bakelite, poly12 May, 2023 (M)Classification of Polymers
  18. 18Match the following: The correct answer is12 May, 2023 (E)Preparation and Properties of Polymers
  19. 19Which one among the following is a semi-synthetic polymer?14 Sep, 2020 (M)Classification of Polymers
  20. 20The structure given below is an example of I. A condensation and biodegradable polymer. II. A biodegradable and thermoplastic polymer. III. 14 Sep, 2020 (E)Classification of Polymers
  21. 21Type of reaction involved in the initial step in the formation of bakelite11 Sep, 2020 (M)Preparation and Properties of Polymers
  22. 22Monomeric units of melamine polymer are11 Sep, 2020 (E)Preparation and Properties of Polymers
  23. 23Which of the following vinyl derivatives is the most reactive towards anionic polymerisation?10 Sep, 2020 (M)Preparation and Properties of Polymers
  24. 24Which of the following are synthetic rubbers? (i) Terylene (ii) Buna-S (iii) Buna-N (iv) Neoprene (v) Polyacrylonitrile10 Sep, 2020 (E)Preparation and Properties of Polymers
  25. 25Which one of the following is made by using step growth polymerization?09 Sep, 2020 (M)Classification of Polymers
  26. 26Match the following: {array}{lll} {1}{c}{ List-I } & {1}{c}{ List II } \\ A. Natural rubber & I. & Free radical polymerisation \\ B. PVC & I09 Sep, 2020 (E)Preparation and Properties of Polymers
  27. 27Which of the following polymer is formed due to the co-polymerisation of 1,3-butadiene and phenylethene?06 May, 2019 (M)Preparation and Properties of Polymers
  28. 28Match the following: The correct answer is04 May, 2019 (M)Classification of Polymers
  29. 29The monomer units of nylon-6, 6, nylon 2-nylon-6 are respectively04 May, 2019 (E)Preparation and Properties of Polymers
  30. 30The enzyme responsible for the convension of proteins to -amino acids is03 May, 2019 (E)Classification of Polymers
  31. 31Examples for natural polymers are07 May, 2018 (M)Classification of Polymers
  32. 32Match the following. The correct answer is05 May, 2018 (M)Preparation and Properties of Polymers
  33. 33The schematic illustrations of macromolecules given below represent.05 May, 2018 (E)Classification of Polymers
  34. 34The formation of terylene (or Dacron) from ethylene glycol and terephthalic acid is ____.04 May, 2018 (M)Classification of Polymers
  35. 35Identify the monomers used in the manufacture of glyptal , dacron and nylon 2-nylon .04 May, 2018 (E)Preparation and Properties of Polymers
  36. 36The monomers of buna-S rubber are2017Preparation and Properties of Polymers
  37. 37The poly dispersity index (PDI) of a polymer is ( weight average molecular mass and number average molecular mass)2016Classification of Polymers
  38. 38Identify condensation homopolymer from the following:2015Classification of Polymers
  39. 39Identify the copolymer from the following2014Classification of Polymers
  40. 40Example of a biodegradable polymer pair is2013Classification of Polymers
  41. 41The monomer of neoprene is2012Preparation and Properties of Polymers
  42. 42Which one of the following is not a biopolymer?2011Classification of Polymers
  43. 43If the number average molecular weight and weight average molecular weight of a polymer are 40000 and 60000 respectively, the polydispersity2010Preparation and Properties of Polymers
  44. 44Which of the following is a biodegradable polymer?2007Classification of Polymers
  45. 45Which one of the following is used in the preparation of styrene?2001Preparation and Properties of Polymers

Frequently Asked Questions

1.How many questions are available for Polymers?

This chapter includes 45 questions compiled from TS EAMCET papers spanning 2001 to 2025.

2.Are these questions only from TS EAMCET, or from other exams too?

These are TS EAMCET questions specifically for the Polymers chapter. Questions from other exams like JEE Main or NTA Abhyas (JEE Main) are organised separately under their respective exam sections.

3.Is Polymers an important chapter for TS EAMCET Chemistry?

Polymers has appeared in 16 of the 25 years of TS EAMCET papers covered here, with 45 questions across 43 papers - about one per paper it appears in.

4.What is the difficulty level of Polymers questions in TS EAMCET?

Of the 45 questions analysed for this chapter, 58% are easy, 33% moderate and 9% tough. 2020 had the most, with 8 questions.

5.Which topics in Polymers should I focus on?

These topics have carried the most weightage in Polymers:

  • Preparation and Properties of Polymers - 25 questions (56%)
  • Classification of Polymers - 20 questions (44%)
  • Preparation and Properties of Polymers has produced the most tough questions (3).
6.Is Polymers's weightage in TS EAMCET going up or down?

Across all 43 papers analysed, Polymers has averaged about 1.0 questions per paper. In the last three years (2022–2024), that average has fallen, at about 0.7 questions per paper. Use the year-wise numbers on this page for the exact trend before you decide how much time to give it.